Applications of E615:
      E615 series food safe mold making silicone rubber could be mainly used for chocolate mould, candy mould, biscuit mould, nougat mould, fudge mould, fondant mould, sugar mold, tallow mold, and so on.

Characteristics of food safe silicone:
 - Low shrinkage, so the shape of your target product will be exactly what you want(less than 0.1%)
- Reusable for your food mold, which can save your money and time.
- Favorable for molding and demolding. (mixing ratio at 1:1 /10:1)
- Easy to get cured.
- Able to copy every fine detail on the original food model, which will make your food(e.g. chocolate mold, biscuit mold)

Technique Datasheet for this food safe silicone:

Operation instructions of HY- E series molding silicone rubber:
1. Please clean your original model(mother model) before you begin your mold making operation.
2. Weigh suitable amount of E615 silicone.
3. Mixing the two parts by the ratio of 1:1/10:1 and mix part A and part B evenly in 2-3 minutes.
4. And get the mixture for vacuum-pumping for de-air the bubble in about 2-3 minutes.
5. Fix the mother model onto a clean wooden board.
5. Build a mold frame with four plastic plates or wooden plates, sealing the gap.
6. Release agent should be applied onto the productssurface.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame.
8. When the silicone mixture gets cured, a clear silicone mold will come out!

Notice:
E615 silicone is platinum cure type, so please avoid contact it with the following material:
1. Condensation cure silicone
2. Sulphur, sulfide.
3. Amine compounds as well as contains the amine materials.
4. Pewter solder flux.